Until recently I was experiencing the same boot failure problem. S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology)is a somewhat outdated standard developed as an "early warning" system to detect hard disk issues. After trying everything. Ultimately, if you were to pick up (or could somehow borrow) a different IDE cable to test for a short time it may also call out a failed or failing cable
Gold subscriber Administrator Posts: 44762 Joined: Tue Aug 20, 2002 10:51 pm Location: Somewhere, having a beer Re: No hard drive detected - error message says Quote #13 Mon Jun 02, floppy disc not recognised on insertion in floppy drive messege please insert floppy disc keeps comming up, floppy drive in device manager says this device is working properley? 14. If it's still crashing it could be a hardware fault. Automated Repair process will report any issues found with your hard disk or RAM memory: To download Easy Recovery Essentials, click here. http://www.tomshardware.com/forum/271007-45-disk-drive-error-message-load
I am a former Network Admin and I spent 3 hours reinstalling, pulling the jumper on the system board, etc., etc. Now take the side of the case off. This appears to be Windows' problem not BIOS's. Replace it with another available power lead that appears similar to the one originally on the drive.
many thanks Cameron Report mking78› bearguy2u - Feb 20, 2010 06:59PM Hi Michael, My Name is marshall is there any chance that I could get your email address due to I thanks tons. Once or twice in the six weeks since I purchased the computer, the error did not appear. How To Install A Flash Drive Find the back of the Floppy drive inside of the case.
The A: drive is the one after the twist. How To Install A Floppy Drive In Windows 7 This is all due to buggy hardware or firmware floppy drivers. 5.3.3. Boot Configuration If you have problems and the kernel hangs during the boot process, doesn't recognize peripherals you actually have, A possible workaround may be disabling the USB controller in your mainboard BIOS setup. Although I am skeptical that there are still some of those offending drives floating around (and if so that you are only receiving errors 6 years later :)), the company *are*
Then very important one like many guys mentioned above me go to INTEGRATED DEVICES. How To Install A Zip Drive Does the floppy drive initialize at power-on?Do you see the floppy drive motor spinning?If it's a Compaq there were proprietary cables/drives, so swapping drive may not work unless it's the exact by 4Denise / July 27, 2007 3:00 PM PDT In reply to: Disk boot failure: What is it and what can I do to resolve it Ordinarily, I'd tell you to Ensure that the diskette/CD-drive subsystem is properly installed.
Instructions for this operation are usually included with most tape backup unit kits.Error MessagesYou may receive some of the following error messages when trying to access your floppy drive. It solved my problem. Error Messages After Installing A Floppy Drive PC is just 3 years old. How To Install A Hard Drive After the Windows logo comes on the screen goes black and stays black.
If your desktop is newer, it may not even be available as an option as it is not widely used these days. If you find the time it takes to boot the system unacceptably long, you can create a custom kernel later (see Section 8.6, “Compiling a New Kernel”). 5.3.6. Reporting Installation Problems If you All rights reserved. XP Installation Error on New Hard Drive 10. How To Install A Optical Drive
I tried clicking and holding f8 prior to the Windows logo so I could access Safe Mode. If all else fails cheat, cheat until you get caught then lie! I get error messages as "Disk boot failure" "Hard Drive Missing. "Hard drive 0 missing" and some other times "Disk Write Delay Failed". Try troubleshooting it here.
Asus AV8 Deluxe MOBO- AMD Athlon 64 3500+ Processor Socket 939, (2.2GB) CPU - 300GB Maxtor SATA HD.- 500GB SATA storage HD WD. 500GB Diamond max Maxtor Storage. 500 Watts power How To Install A Hard Disk Drive If you have more than one CD-ROM drive, try changing the CD-ROM to the other drive. If the drive's activity light comes on as soon as the PC is booted and stays on, solid the whole time the PC is on, this is a dead ringer for
Power up the system to see if the lights stay on continuously.If you started experiencing floppy drive problems after adding a tape backup unit, try using the additional floppy cable that please tell me in details thanks Report workout girl- Dec 17, 2009 01:34PM Hey thanks. Yours Truly, Carmen Report pana4321- Oct 6, 2009 03:25PM hi. How To Install A Usb Drive Error Messages after New Hard Drive and Installations of XP Pro 8.
It stated Bios battery failure. First, Try a test, put a floppy disk that you know is bootable into the floppy disk drive. Formatting and/or recovering the drive will most likely not correct an error of this type. It is easy with many 3.5" drives to connect the drive backwards because the cable is keyed but the connectors aren't always.
once again thanks and good luck ^_^ Report Warlock- Apr 12, 2010 07:41PM thanks man you know about computers Report NoRule- Apr 19, 2010 08:01PM skillz dat killz Report mathgeek- Apr If the installer fails to recognize a CD-ROM, try just running the option Detect and mount CD-ROM a second time. Preview post Submit post Cancel post You are reporting the following post: Disk boot failure: What is it and what can I do to resolve it This post has been flagged I have found that whilst product is often well designed the production people love to save a few cents here and there and usually it is always with connectors.
I already tried f12 after turning on. I have seen quite a few problems with the ide 40 pin connectors and I guess the new SATA cables and their fragile looking connectors are almost begging to cause trouble. Restart my PC> This provides me with a temporary fix ONLY but not permanent as the problem continues to take place. 3 weeks ago I replced the CMOS battery and my Any help would be appreciated.
Forum SolvedError message: Can't initialize disk because of I/O error Forum SolvedError message: "Windows cannot be installed to this disk..." Forum SolvedError Message: Disk Boot failure-insert system disk and press enter Top just brew it! Reinstall the Battery5. Each time you remove an item, try to boot to a floppy diskette and format a diskette.
Check the boot settings in the BIOS. It is often easier and cheaper just to get a new drive. Unplug the AC mains cable so the computer is NOT powered on. You might save yourself lots of $$$, like I did!
Some DMA related issues with older CD-ROM drives are known to be resolved in this way. If neither of those changes work, get a new FDD (they are mechanical, and they do wear out). Your instructions are one quick fix! Hard disk drive failure with windows 7 Forum Got BSOD with the message "Unexpected_store_exception" and now I get Disk Read Error on boot Forum SolvedCan USB zip drive "disk drive" error
Sometimes it'll get a flaky drive to behave long enough to transfer your data off. The BIOS stands for Basic Input/output Sytem and can be found by pressing F2 after the memory test is complete and before the Windows LOGO. CD-ROM/DVD drive 3.